BONRXIN BCB-M1000 is an air purification product for odor treatment, with good dust filtration and odor purification effect. It adopts multi-layer filter device, 0.3μm PP filter core and activated carbon filter core. It can effectively filter and intercept dust pollution particles above 0.3μm, and the filtration purification rate reaches 99.7%. A large number of activated carbon filter cores can quickly absorb common toxic and harmful gases such as benzenes, ketones, alcohols, alkanes and other mixed organic waste gases. The clean air treated by the purification equipment can be directly discharged indoors. This product is more flexible to use, and has a variety of filter options. Different filter cores can be used to achieve different treatment effects depending on the environment.

Application Range of the Laser Machine Dust/Mist Purifier

The BONRXIN BCB-M1000 laser marking smoke purifier can effectively absorb and filter smoke and dust generated during welding, laser marking, laser engraving, etc., while adsorb and filtrate toxic harmful gases and dust, such as hydrocarbons compounds to prevent environmental pollution. The main applications are industries that use laser processing and are environmentally demanding, such as the automotive industry, the electrical manufacturing industry, the food and medical industry, the smart card industry, the tobacco industry and so on.

Advantages of the BONRXIN BCB-M1000 laser machine purifier equipment

1, centrifugal fan

The brushless DC motor centrifugal fan has a service life of up to 40,000 hours without high maintenance reliability. It has low operating noise, high speed, high wind pressure and high performance.

2, LCD

The microcomputer liquid crystal display adopts programmable single-chip microcomputer software to realize digital control, brief introduction of operation interface, and operation parameters at a glance. Automatically detect the working state of the fan such as when the pipe is blocked, and automatically alarm when the filter is saturated. Low pressure control greatly improves safety.

3, multi-layer filtration system

This product uses a total of three filters, which are 5μm dust bag for dust filtration, 0.3μm imported PP filter, and activated carbon filter. It is filtered layer by layer according to the filtration precision to achieve complete filtration of dust above 0.3μm. Finally, it is filtered by high-efficiency activated carbon to carry out the last toxic and harmful gas adsorption on the dust above 0.3μm to achieve the final clean air discharge.

Recommendations for Laser Machine Smoke Purifier Consumables Life Cycle

Primary filter cotton: 7-15 days

PP filter: 1-3 months

Activated carbon filter: 3-6 months

Note: Due to the different pollution levels in the place of use, the specific replacement cycle is subject to actual conditions.

Part of the Parameters of the BONRXIN BCB-M1000 smoke purifier

Machine model: BCB-1000W-YF

Input voltage: AC220V/50Hz

Rated power: 700W

Handling air volume: 1034m3/h

Static pressure: 1200 Pa

Speed: 5220rpm

Intake and exhaust interface size: φ100mm/φ100mm

Body size: 500 x 420 x 830 (mm)

Machine net weight: 53kg